Random good picture Not show

1. A novel micro electrical discharge machining(EDM) method is described.

2. Comparative experiments between powder - mixed electrical discharge machining ( EDM ) and conventional EDM are carried out.

3. In order to eliminate higher harmonics embedded driving signal in miniaturized EDM(Electrical Discharge Machining) system, matching circuit for ultrasonic generator has been carried out.

4. The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.

5. There is machining error in electrical discharge machining ( EDM ) due to the electrode's orbiting.

6. Due to a little quantity, electrical discharge machining(Micro-EDM) is usually developed in single production, leading to long production cycle, repetitive design and high cost.

7. The newest trends of electrical discharge machining(EDM) including die-sinking EDM, micro EDM and wire EDM(WEDM) in Japan were presented.

8. The rules that the spindle servo system parameters would influence the workability of mixed air EDM (electrical discharge machining) technology are introduced.

9. Micro electrical discharge machining (MWEDM), a nontraditional micro gear die fabrication method,[Sentencedict.com ] is presented in this paper.

10. Electrical discharge machining (EDM), or spark machining, as it is so called, is based on the eroding effect of an electric spark on both the electrodes used to produce.

11. When applying the electrical discharge machining process, the material is eroded as a result of electrical discharge between tool and work.

12. The Electrical Discharge Machining (EDM) has been a very important method of machining, and performs its alternative function in industry.

13. Electrical discharge machining removes metal by controlled electrical arcing ( sparking ) between the tool and workpiece.

14. Ultrasonic vibration electrical discharge machining ( UEDM ) in gas is proposed in this paper.

15. As an important part of WEDM (Wire Cut Electrical Discharge Machining) machine , pulse generator is one of main factors which influence WEDM process.

16. A new WEDM(Wire Electrical Discharge Machining) technology for finishing cut has been developed, in which gas has been used as a dielectric instead of water.

17. The advantage is that electrical discharge machining processes with good surface roughness and machines metal of any hardness.

18. The stainless steel fibrous porous materials are processed by Wire cut Electrical Discharge Machining(WEDM).

19. Abstract: The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining(EDM) and its drive and control principle.

20. The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).

21. The accurate analysis method of performances plays an important role in the optimization with multiple performance objectives of micro electrical discharge machining(EDM).

22. The concept, characteristics and application of high energy beam machining, electrical discharge machining, electrochemical machining and material abscission machining separately discuss.

23. The damaged layer of monocrystalline silicon cut by wire electrical discharge machining (WEDM) was investigated via cross-section microscopy and preferred etching detection methods.

24. Comparative measurements of percentage of silicon on the surface of workpiece by powder-mixed electrical discharge machining (EDM) were carried out.